Concrete Mixer Truck ECOMIX PLM-7 PLM-9 CML-8 CML9 CML-10 CML-12 CML-16 CML8 CML9 CML10 CML12 CML16 CML 8 9 10 12 16 gearbox reducer

Concrete Mixer Truck  Concrete Mixer Truck PLM-7 PLM-9 CML-8 CML9 CML-10 CML-12 CML-16 CML8 CML9 CML10 CML12 CML16 CML 8 9 10 12 16 gearbox reducer CML-8 CML9 CML-10 CML-12 CML-16 CML8 CML9 CML10 CML12 CML16 CML 8 9 10 12 16  gearbox

ECOMIX CML-8 CML-9 CML-10 PK7500 P7300 P8300 P3300 P3301 P4300 P5300 Concrete Transport Mixer Truck transmissions for transport mixers

Compact power packs from for the world of concrete The experience of more than 300,000 mixer gearboxes in the rough
and tough concrete mixer market, their newest gearbox development, the ECOMIX II family. With the CML 8 and the CML 10  designed a new gearbox range, which fulfills with the revolutionary design all the requests, OEM and enduser expect from a modern drive.
Weight saving, low noise, increased life time, easier maintenance and assembly and eco friendliness are all features of the new range.
In addition to the new range, continues to offer the well proven P-Series which has been continuously upgraded in design and specifications.

Hydraulic fluid

Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.

Details regarding the choice of hydraulic fluid
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range – the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.